Sensing method
Distance-setting
Sensing distance
5 mm to 500 mm (White paper 200*200mm)
Setting range
50 to 500mm (White paper 200*200mm)
Differential distance
10% Max. of setting distance
Reflectivity characteristic (black-white error)
10% Max. of setting distance
Light source
Infrared LED (Emission wave length: 860nm)
Power supply voltage
10 to 30 VDC (ripple(p-p) 10% included)
Current consumption
50mA DC Max.
Control output (Output type)
NPN/PNP open collector output
Control output (Load current)
0 to 100 mA
Control output (Residual voltage)
(DC) 1.2 V Max. (NPN output, Load current 100mA Max.)
(DC) 2 V Max. (PNP output, Load current 100mA Max.)
Operation mode
Light-ON/Dark-ON selectable
Load power supply voltage
30 VDC Max.
Protective circuit
Surge suppressor
Output short-cut protection
Power supply reverse polarity protection
Mutual interference prevention
Response time
2ms Max.
Sensitivity setting
6-turn endless adjustment (with indicator)
Ambient illuminance
Incandescent lamp:5000 lux Max., Sunlight:10000 lux Max.
Ambient temperature
Operating: -25 to 55 ℃
Storage: -25 to 55 ℃
(with no icing or condensation)
Ambient humidity
Operating: 35 to 85%RH
Storage: 35 to 85%RH
(with no condensation)
Insulation resistance
20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength
1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection
IEC60529: IP67
Company standard: Oil-proof
Applicable standard (EC Directive (Low Voltage Directive))
EN60947-5-2
Applicable standard (EC Directive (EMC))
EMI: EN60947-5-2
Emission Enclosure: EN55011 Group 1 class A
EMS: EN60947-5-2
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Burst: IEC61000-4-4
Conformed standard (EC Directive (CE marking))
Equipped
Connection method
Pre-wired models (Cable length: 5 m)
Indicator
Light indicator(orange), Stability indicator(green)
Weight (packed state)
Approx. 250 g
Tightening torque
1.2 N.mMax. (with M4 screw)
Material (case)
Zinc diecast
Material (lens)
Methacrylate resin
Material (cover)
Polyethyl sulfon
Material (mounting bracket)
Stainless steel(SUS304)
Accessories
Instruction manual, Mounting bracket, Adjustment driver, Hexagon bolt M4*12(with Spring washers, Flat washers)