Sensing method
Diffuse-reflective
Sensing distance
5mm to 100mm (White paper 100 x 100 mm)
Differential distance
20% Max. of sensing distance
Light source
Infrared LED (Emission_wave_length: 860 nm)
Power supply voltage
12 to 24 VDC -10% to 10% (ripple (p-p) 10% Max.)
Current consumption
30 mA DC Max.
Control output (Output type)
PNP open collector output
Control output (Load current)
0 to 100 mA
Control output (Residual voltage)
(DC) 1 V Max. (Load current: Less than 10mA)
(DC) 2 V Max. (Load current: 10 to 100 mA)
Operation mode
Light-ON/Dark-ON selectable
Load power supply voltage
26.4 VDC Max.
Protective circuit
Surge suppressor
Output short-cut protection
Output short-circuit protection
Power supply reverse polarity protection
Mutual interference prevention
Response time
1 ms Max.
Sensitivity setting
Single-turn adjustment
Ambient illuminance
Incandescent lamp: 3000 lux Max., Sunlight: 10000 lux Max.
Ambient temperature
Operating: -25 to 55℃
Storage: -40 to 70℃
(with no icing or condensation)
Ambient humidity
Operating: 35 to 85%
Storage: 35 to 95%
(with no icing or condensation)
Insulation resistance
20 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength
1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection
IEC60529: IP67
Connection method
Pre-wired models （Cable length: 2 m）
Indicator
Operation indicator (orange), Stability indicator (green)
Tightening torque
0.5 N・m Max. (with M3 screw)
Material (case)
PBT
Material (lens)
Denatured Polyarylate
Accessories
Instruction manual
