(1) Turn off the power, and then for more than 5 minutes.
(2) Remove the 2-point screw top of the head cover, and remove the head cover and an old glove.
(3) install a new glove and head cover to the case.
(4) Install the glove-head cover two points of the head cover screw top to fit the screw holes, screws
Then stop. (Recommended tightening torque: 0.6N · m)
※ Please be sure mounting O-ring, which is attached to the case as well as the glove.
It is an obstacle to the drip-proof structure.
(5) After work please make sure that the glove is securely fixed.
There is likely to fall off during use.