Item
Specifications
Product Number
EX-17
Part Number
EX-17
Features
Amplifier built-in extraordinarily small and slim size
(Note) Either Light-ON or Dark-ON can be selected by the operation mode switch (located on the bifurcation).
Sensing range
500 mm 19.685 in
Min. sensing object
dia. 2 mm dia. 0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 500 mm 19.685 in)
Hysteresis
-
Repeatability(perpendicular to sensing axis)
0.05 mm 0.002 in or less
Supply voltage
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption
25 mA or less
Output
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less(at 100 mA sink current),1 V or less (at 16 mA sink current)
Output:Utilization category
-
Output:Short-circuit protection
Incorporated
Response time
0.5 ms or less
Operation indicator
Orange LED (lights up when the output is ON), located on the bifurcation
Incident beam indicator
Red LED (lights up under light received condition), located on the receiver
Stability indicator
Green LED (lights up under stable light received condition or stable dark condition), located on the receiver
Pollution degree
-
Protection
IP67 (IEC)
Ambient temperature
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity
35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance
Incandescent light: 3,000 lx at the light-receiving face
EMC
-
Voltage withstandability
1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 500 Hz frequency, 3 mm 0.118 in amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Material
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
Bifurcation: Polyalylate
Cable
0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long (beyond bifurcation; from emitter/receiver to bifurcation: 0.5 m 1.640 ft long)
Cable extension
Extension up to total 100 m 328 ft is possible with 0.3 mm2, or more, cable.
Weight
Net weight: 55 g approx
Gross weight: 80 g approx
Accessory
Mounting screws: 1 set
Adjusting screwdriver: 1 pc