Type
Grooved Type (T-shaped) (Slot center 7 mm)
Luminous method
Non-modulated
Sensing method
Through-beam type
Sensing distance
5 mm (slot width)
Operation mode
Dark-ON/Light-ON (selectable)
Standard sensing object
Opaque object (2 x 0.8 mm min.)
Differential distance elements
0.025 mm max.
Light source (Peak wavelength)
Infrared LED (940 nm)
Indicator
No incident light (red)
Power supply voltage
5 to 24 VDC ±10% (ripple (p-p)10% max.)
Current consumption
12 mA max. (L terminal open)
Control output (Output type)
NPN Open collector output
Control output (Load power supply voltage)
5 to 24 VDC
Control output (Load current)
100 mA max.
Control output (Residual voltage)
0.8 V max. (at 100 mA load current)
0.4 V max. (at 40 mA load current)
Protection circuits
Output short-cut protection
Response frequency elements
1 kHz min. (average 3 kHz)
(See "Measurement condition of Response frequency elements")
Illumination on the surface receiver
Fluorescent light: 1000 lx max.
Ambient temperature
Operating: -25 to 55 ℃
Storage: -30 to 80 ℃
(with no icing or condensation)
Ambient humidity
Operating: 5 to 85% RH
Storage: 5 to 95% RH
(with no icing or condensation)
Vibration resistance
20 to 2000 Hz, peak acceleration 100 m/s**2, 1.5-mm double amplitude 2 h each in X, Y, and Z directions (4 min periods)
Shock resistance
500 m/s**2, 3 times each in X, Y, and Z directions
Degree of protection (IEC60529)
IP50
Connection method
Connector type (direct soldering possible)
Material
Case: Polybutylene phthalate (PBT)
Emitter/Receiver Cover: Polycarbonate(PC)